Before You Begin Hardware Overview This installation guide provides basic instructions LED Indicators for installing the DAP-3712 on your network. The device should be ensured that systems employing high gain directional antennas are used exclusively for fixed, point-to-point operations. For additional information about how to use the access point, please see the User Manual from the D-Link support website.
Figure 5: Connecting the Ethernet Cable Connect the adjustment kit to the base of the DAP-3712 by pressing it in until it clicks and locks in place. Use the adjustment kit to position the antenna at the desired...
Launch a web browser. Enter 192.168.0.50 To power the DAP-3712, use a standard Ethernet in the address field of your browser. cable to connect the PoE port on the DAP-3712 Log in to the administration user interface. to a 48 V PoE injector.
Mounting the Device Installation Recommendations Figure 10: Changing the IP Address If you plan to install the DAP-3712 on a pole, orient the front of the access point toward the On step four of the Setup Wizard intended coverage area. The radio antenna...
Checking the Signal Strength Before fixing the device in place, slowly pan the DAP-3712 from side to side and check the LED indicator to find the position where the signal is strongest. Mounting on a Pole...
Appendix - Statements FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.