DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Connections Setup
In this menu you can configure basic parameters of the access point's local area network and
configure connection to the Internet (a WAN connection).
LAN
To configure the access point's local interface, go to the Connections Setup / LAN page.
IPv4
Go to the IPv4 tab to change IPv4 address, configure the built-in DHCP server, or specify MAC
address and IP address pairs.
Figure 63. Configuring the local interface. The IPv4 tab. The Local IP Address section.
Page 72 of 175
Configuring via Web-based Interface