Table of Contents
Advertisement
DAP-300P Wireless N300 PoE Access Point / Router
User Manual
Parameter
Mode of local IP
address assignment
IP address
Mask
Gateway IP address
Hostname
Figure 64. Configuring the local interface. The IPv4 tab. The Dynamic IP Addresses section.
Local IP Address
For the Access point, Repeater, and Client modes only.
Select the needed value from the drop-down list.
•
Static: the IP address, subnet mask, and the gateway IP
address are assigned manually.
•
Dynamic: the access point automatically obtains these
parameters from the LAN DHCP server or from the router to
which it connects.
The IP address of the access point in the local subnet. By default, the
following value is specified: 192.168.0.50.
The mask of the local subnet. By default, the following value is
specified: 255.255.255.0.
For the Access point, Repeater, and Client modes only.
The gateway IP address which is used by the access point to connect
to the Internet (e.g., for synchronizing the system time with an NTP
server). Optional.
The name of the device assigned to its IP address in the local subnet.
Page 73 of 175
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
