Draytek Vigor2865 Series Quick Start Manual page 9

Right
LED
Left
LAN
LED
P1~P5
Right
LED
The port "WAN2 / P6" is switchable. It can be used for LAN connection or WAN
connection according to the settings configured in WUI.
Interface
Factory Reset
USB
WAN2 / P6
LAN P1-P5
DSL
PWR
ON/OFF
SIM 1/2
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps.
On The port is connected.
Off The port is disconnected.
Blinking The data is transmitting.
On The port is connected with 1000Mbps.
Off The port is connected with 10/100Mbps.
Description
Restore the default settings. Usage: Turn on the router
(ACT LED is blinking). Press the hole and keep for more than
5 seconds. When you see the ACT LED begins to blink
rapidly than usual, release the button. Then the router will
restart with the factory default configuration.
Connecter for a USB device (for 3G/4G USB Modem or
printer or thermometer).
Connecter for local network devices or modem for
accessing Internet.
Connecters for local network devices.
Connecter for accessing the Internet.
Connecter for a power adapter.
Power Switch.
Connecter for installing LTE antennas.
Slot for installing SIM card.
Types for SIM cards include single SIM card and Dual-SIM
card. Consult your dealer for more detailed information.
3