Vigor2865Ac / Vigor2865Lac / Vigor2865Ax - Draytek Vigor2865 Series Quick Start Manual

2 . 2 V i g o r 2 8 6 5
2 . 2 V i g o r 2 8 6 5
LED
ACT
WAN2
QoS
USB
LTE
DSL
WCF
2.4G/5G
a c / V i g o r 2 8 6
a c / V i g o r 2 8 6
Status Explanation
Off The router is powered off.
Blinking The router is powered on and running
normally.
On Internet connection is ready.
Off Internet connection is not ready.
Blinking The data is transmitting.
On The QoS function is active.
Off The QoS function is inactive.
On USB device is connected and ready for use.
Off No USB device is connected.
Blinking The data is transmitting.
On LTE device is connected and ready for use.
Off LTE device is not detected, or has serious
problem (e.g., no SIM card, SIM pin error, SIM
deactivated, and etc.).
Blinking Slowly: LTE device is in dialing up.
Quickly: The data is transmitting.
On The router is ready to access Internet through
DSL link.
Blinking Slowly: The DSL connection is ready.
Quickly: The connection is training.
On The Web Content Filter is active. (It is
enabled from Firewall >> General Setup).
Off WCF is disabled.
2.4G/5G: Wireless access point with
On
bandwidth of 2.4GHz/5GHz is ready.
5 L a c / V i g o r 2
5 L a c / V i g o r 2
4
8 6 5 a x
8 6 5 a x