Makita VC2201M Series Instruction Manual page 9

Installing the air filter
013395
Wipe off the seal face.
Set the new air filters and fix them with the filter hooks.
Flip the stopper lever to lock the air filters.
Set the tank cover onto the tank and lock it with hooks.
014948
NOTICE:
Make sure the hooks on the filters are set at the
•
correct position.
Cleaning the level sensors
1
013464
The level sensors detect liquid when the tank becomes
full with liquid. Clean the level sensors with a soft cloth
from time to time when changing the air filters.
Cleaning the air filters
Clogged filter causes poor suction performance.
Clean out the filters from time to time.
1. Level sensors
9
To remove dust or particles adhering to the filters,
remove the prefilter from the air filter. And tap the
prefilter several times.
013484
Occasionally wash the powder filter in water, rinse and
dry thoroughly in the shade before use. Never wash
filters in a washing machine.
NOTE:
Do not rub and scratch the powder filter, the
•
prefilter, or damper with hard objects such as a
brush and a paddle.
The filters are consumable and are recommended
•
to have some spares for them.
Storage of power supply cord
015696
015697
Wind up the power supply cord around the multi-hook or
the base hook.
Storage of accessories
NOTE:
Do not apply
•
accessories that are held by the pipe holder.
Applying an excessive force to these accessories
may cause damage to the pipe holder.
1. Power supply
cord
1
2. Multi-hook
2
1. Power supply
1 cord
2. Base hook
2
an excessive force to the