Makita VC2201M Series Instruction Manual page 5

When the tank is full and the beep sounds, switch off
the cleaner and empty the tank.
Auto-suction stop during suction operation
WARNING:
Do not pick up foam or soapy liquid. Picking up
•
foam or soapy liquid can cause foam to come out
of air exit before the auto-suction stop works.
Continuing to using in this condition may cause an
electric shock and breakage of the cleaner.
The cleaner has a mechanism that prevents water from
immersing into the motor when picking up more than a
certain amount of water.
When the tank is full with liquid, the cleaner emits long
warning beep. Switch off the cleaner and empty the tank
when this beep sounds.
Usage of base hook
CAUTION:
Be careful not to pinch your fingers when
•
closing the base hook. Failure to do so may
cause personal injury.
NOTICE:
Do not apply an excessive force on the base hook.
•
The excessive force on the base hook may
damage the base hook. Close the base hook
when not in use.
Opening the base hook allows the following usage.
1. Storing the power supply cord
015688
NOTICE:
Do not use the cleaner or a connected electric
•
power tool with a power supply cord wound on
the base hook. Using the cleaner or the
connected electric power tool with power supply
cord may cause damage the power supply cord.
1. Base hook
2. Power supply
cord
1
2
2. Storing the front cuffs
015689
Front cuffs 22, 24 and 38 can be stored (up to two at a time).
3. Storing the hose
015690
4. Resting a reasonable size of electric power
tool for the base hook, such as circular saw.
015691
Locking or unlocking the caster
3
1
4
2
013482
To lock the caster with a stopper, lower the stopper lever
and the caster no longer will rotate. To release the
caster from the locked position, raise the stopper lever.
Locking the caster is convenient when storing the
cleaner, stopping the work on the way and keeping the
cleaner still.
To operate the stopper, move it by hand.
5
1. Front cuffs
1
1. Hose
1
1. FREE position
2. LOCK position
3. Stopper lever
4. Caster