Specifications - Makita VC2201M Series Instruction Manual

ENGLISH (Original instructions)

SPECIFICATIONS

Volume flow (air)
Type of protection
Recoverable capacity
Dimensions (L x W x H)
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications may differ from country to country.
• Weight according to EPTA-Procedure 01/2003
Symbols
The following show the symbols used for the equipment.
Be sure that you understand their meaning before use.
･
Read instruction manual.
･
DOUBLE INSULATION
･
Take particular care and attention.
･
Warning! The cleaner may contain
hazardous dust.
･
Never stand on the cleaner.
･
Dust class M (medium). The cleaners
are capable of picking up dust class L
and M. Follow your county's regulations
relating to dusts and to occupational
health and safety.
･
Only for EU countries
Do not dispose of electric equipment
together
material!
In observance
Directive,
Electronic
implementation in accordance with
national law, electric equipment that
have reached the end of their life must
be collected separately and returned to
an
recycling facility.
Model
With φ28 mm X 3.5 m hose
With φ38 mm X 2.5 m hose
Vacuum
Dust
Water
Net weight
Safety class
with household
of the European
on Waste Electric
Equipment and
environmentally compatible
END293-1
Intended use
The tool is intended for collecting both wet and dry dust.
The tool is suitable for commercial use, for example in
hotels, schools, hospitals, factories, shops, offices and
rental businesses.
Power supply
The tool should be connected only to a power supply of
the same voltage as indicated on the nameplate, and
can only be operated on single-phase AC supply. They
are double-insulated and can, therefore, also be used
from sockets without earth wire.
Noise
The typical
according to EN/IEC60704:
Sound pressure level (L
Uncertainty (K) : 2.5 dB (A)
The noise level under working may exceed 80 dB (A).
waste
Vibration
and
The vibration
its
determined according to EN/IEC60335:
The vibration emission value is below 2.5 m/s
For European countries only
EC Declaration of Conformity
Makita declares that the following Machine(s):
Designation of Machine:
Vacuum Cleaner
Model No./ Type: VC2201M
2
VC2201M
3
2.0 m /min
3
3.5 m /min
22 kPa
IP X 4 (splash-proof)
22 L
17 L
552 mm x 398 mm x 569 mm
16.0 kg
/II
A-weighted noise
) : 72.5 dB (A)
pA
Wear ear protection
total value (tri-axial
ENE084-1
ENF002-2
ENG905-1
level determined
ENG900-1
vector sum)
2
.
ENH038-3