Makita VC2201M Series Instruction Manual page 6

NOTICE:
When moving the cleaner, make sure that the
•
caster is unlocked. Moving the cleaner with the
caster in the locked position may cause damage to
the caster.
Cap
There is a cap on the mounting port. The cap prevents
the vacuumed dust from getting out from the cleaner.
ASSEMBLY
WARNING:
This unit may contain hazardous dust. When
•
replacing filter elements and dust bag, always use
a P2-respirator.
Always be sure that the cleaner is switched off and
•
unplugged before carrying out any work on the
cleaner.
Never switch on until all filters and dust bag are
•
completely installed and the volume flow control is
tested.
Installing and disposing the filter bag
WARNING:
Always use a P2-respirator.
•
When using the filter bag, also use the air filter
•
together that is preinstalled on the tool. Failure to
use the air filter together may cause unusual noise
and heat, resulting in a fire.
CAUTION:
Never pick up water or other liquids or wet dusts
•
when using the filter bag. Picking up such things
may cause the filter bag breakage.
015692
1. Extend the filter bag.
013378
1. Filter bag
1
1. Filter bag
1
2. Align the filter bag opening with the dust suction
opening of the cleaner.
3. Insert the cardboard of the filter bag onto the tool
so that it is positioned at the end beyond the
detent protrusion.
When disposing the filter bag, pull the edge on the filter
bag's mouth so that the mouth is closed by a paper.
Installing polyethylene bag
Cleaner can also be used without polyethylene bag.
However, using polyethylene bag is easier to empty the
tank without letting your hands dirty.
1
3
013383
Spread the polyethylene bag in the tank. Insert it
between the holder plate and the tank, and pull it to the
hose inlet.
1
2
013384
Spread the bag around the top of the tank.
Hook up the other side of the bag around the top of the
tank so that the prefilter hook can catch and hold it
securely.
NOTE:
A polyethylene bag available on the market can be
•
used. The
recommended.
Too much dust will tear the bag easily, so do not
•
collect the dust more than the half of the bag
capacity.
Disposing the polyethylene bag
WARNING:
Always make sure that the cleaner is switched off
•
and unplugged before emptying the polyethylene
bag. Failure to do so may cause an electric shock
and serious personal injury.
6
1. Holder plate
2. Polyethylene
bag
2
3. Tank
1. Holder plate
2. Polyethylene
bag
0.04 mm or thicker one is