R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Drum
ASSEMBLING
(1) Assemble Ball bearing 608ZZ to Drum of opposite side of V pulley 4-37. And assemble Ball bearing 6000ZZ
to the same of V pulley 4-37 side. Refer to Fig. 10.
(2) Mount Drum to Bracket. And tighten V pulley 4-37 with Bit adapter. Refer to Fig. 9.
< Note >
Mount V pulley 4-37 to Drum as follows. See Fig. 11.
< Note >
Enough to tighten V pulley 4-37
to proper level in this step.
V pulley 4-37 is tightened
automatically to firm level
by rotation of Drum.
Grip Drum with groved hand,
to protect hand against injury.
Fig. 11
Bracket complete
Bit adapter
P 7 / 11
V pulley 4-37
Turn clockwise
for tightening.
12
9
6
3