Technical Specifications; Safety Information - Grizzly ERM 1641 GT Translation Of The Original Instructions For Use

GB

Technical Specifications

Electric Lawnmower
Mains voltage ............. 230-240 V~, 50 Hz
Motor input power
Protection class ..................................II
Protection type................................... IP24
Idling speed (n) .........................3500 min
Cutting circle ....................................41 cm
Cut height ............................... 30 - 75 mm
Weight ...........................................21,3 kg
Lawn bag volume
Sound pressure level
(L ) ..........................83,8 dB(A), K
pA
Sound power level
guaranteed .............................. 96 dB(A)
measured ....... 93,6 dB(A), K
Vibration (a ) ........... 1,92 m/s
h
This device is designed for operation on
a power supply network with a system
impedance Zmax at the transfer point
(domestic connection) of a maximum of
0,346 Ohms.
The user must ensure that the device is
operated only on a power supply network
that fulfils this requirement.
If necessary, the local power supply com-
pany can be asked for the system imped-
ance.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to
compare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
20
........ ERM 1641 GT
......................... 1600 W
................................50 l
pA
(L )
WA
=1,94 dB
WA
, K=1,5 m/s
2
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at pro-
tecting the user should be based
on estimated exposure under
-1
actual usage conditions (all parts
of the operating cycle are to be
considered, including, for example,
times during which the power tool is
turned off and times when the tool
=3 dB is turned on but is running idle).
Noise and vibration values were deter-
mined according to the standards and
stipulations mentioned in the declaration
2
of conformity.
Technical and optical changes can be car-
ried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
manual are therefore without guarantee.
Legal claims, which are made on the ba-
sis of the instruction manual, cannot thus
be considered as valid.

Safety Information

This section covers the basic safety regu-
lations when working with the electric
lawnmower.