Baratza Vario Quick Start Manual page 3
Faceplate replacement and lever shimming
Hide thumbs
Also See for Vario:
- User manual ,
- Operation manual (45 pages) ,
- Quick start manual (22 pages)
Advertisement
Shim fully inserted pictured below
Shim
RE ASSEMBLY OF THE FACEPLATE
Plug the connector back into the faceplate. Have the unit upside down. Replace the faceplate, putting
the bottom edge of the faceplate (in reference to the grinder standing upside down) in first. Then push
in the top section, lining up the two lever arms with the appropriate slots. Replace the screw.
Flip the grinder back over, push the knobs on to the arms to snap back together, and finish re assembly.
Advertisement
