Sample Calculation; Mounting Considerations - Honeywell FF-SPS4 Series Installation Manual

Safety perimeter guarding

Table of Contents

Figure 2-2 Angle of Divergence and Distance from Reflective Surfaces

The emitter and receiver must have the same protected height and resolution. The emitter

and receiver must be mounted at the same height and aligned with each other.

Sample Calculation

D= L/2(tan2 ° )+R+C

− L = 1200 in. (100 ft)

− R = 0.79 in. (SPS4)

− C = 0

− D = (1200/2) tan 2° + 0.79 in. + 0

− D = 21.75 in. (552 mm)

The minimum distance required in the United States is 100 mm (3.94 in.). Additional distance

may be required depending on the installed scanning distance.

This section contains optical alignment and mounting information (see figures 2-3 and 2-4).

There are various ways to mount FF-SPS4 Series perimeter guarding devices (singularly, in

groups, and in different orientations). The customer is responsible for determining which

mounting method will guard the machine most effectively.

Figure 2-3 Mounting Dimensions - Terminal Strip Style (for reference only)

107063-11 EN FR26 GLO 800 Printed in France

Arrow.com.

Downloaded from

Table of Contents

Show Quick Links

Table of Contents

Ff-sps42tre Ff-sps42trg Ff-sps44cre Ff-sps44crg Ff-sps44cr2 Ff-sps44tre ... Show all