Ethernet Settings; Media Settings - Honeywell PC42t User Manual

Serial Port Settings (continued)
Setting Description
New Line Defines the characters that the printer echoes to the
Character host to indicate that it has moved to a new line.

Ethernet Settings

This section describes the Ethernet IPv4 settings. To view these
settings:
•
Ethernet Settings
Setting Description
IP Assignment Specifies how the printer obtains an IP address.
Method
IP Address Specifies the unique network-level address that is
assigned to each device in a TCP/IP network (IPv4).
Subnet Mask Specifies a number that defines the range of IP
addresses that can be used in a TCP/IP network.
Default Router Specifies the IP address of a router that is used when a
device sends a packet to another subnet or to an
unknown destination.
DHCP Response Specifies if the printer receives DHCP responses by
broadcast or unicast.

Media Settings

This section describes media settings for the printer. To view these
settings:
•
Note: If the printer is not connected to a network, you need to use
PrintSet 5 through a USB connection to configure the media settings.
PC42t Desktop Printer User Guide
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
From the printer web page, click the Configure tab >
Communications > Ethernet.
From the printer web page, click the Configure tab > Printing >
Media.
V10 CONSUMIBLES S.L.
Appendix B — Default Settings
Default
CR/LF
Default
DHCP
0.0.0.0
0.0.0.0
0.0.0.0
Broadcast
49