Default Configuration; Serial Port Settings - Honeywell PC42t User Manual

Appendix B — Default Settings

Default Configuration

Use this appendix to view the default settings on the printer. If you
restore the printer to factory default settings, it will use the values listed
here. The order of the settings reflects the organization of the printer
web page.

Serial Port Settings

This section describes the serial port settings. To view these settings:
•
Note: These settings are not accessible unless you have the optional
serial port installed and a connection to a PC.
Serial Port Settings
Setting Description
Baud Rate Transmission speed in bits per second (bps) for the
serial port.
Data Bits Number of bits that define a character or byte.
Parity Specifies how the printer checks the integrity of the
transmitted data.
Stop Bits Number of bits sent at the end of every character to
allow the receiving signal hardware to detect the end
of a character and to resynchronize with the character
stream.
Hardware Specifies if hardware flow control (RTS/CTS) is used
to manage the rate of data transmission between the
device and the host.
ENQ/ACK Specifies if software flow control (ENQ/ACK) is used
to manage the rate of data transmission between the
device and the host.
XON/XOFF To Specifies if software flow control (XON/XOFF) is used
to manage the rate of data transmission to the host.
XON/XOFF From Specifies if software flow control (XON/XOFF) is used
to manage the rate of data transmission from the
host.
48
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
From the printer web page, click the Configure tab >
Communications > Serial.
V10 CONSUMIBLES S.L.
Default
115200
8
None
1
Disable
Disable
Disable
Disable
PC42t Desktop Printer User Guide