Makita GA5010 Technical Information page 9

W
iring diagram
[2] Handle
When Terminal block is used
Fig. D-4
Bend Insulated terminals on the Lead wires
connected to Switch in order to prevent them
from touching the inside wall of Handle.
Insulated terminal
When Terminal block is not used
Fig. D-5
Bend Insulated terminals on the Lead wires
connected to Switch in order to prevent them
from touching the inside wall of Handle.
Insulated terminal
Insulated terminal
Handle
Switch
Insulated terminal
Handle
Switch
Fix the following lead wires with Lead wire holder:
*two Field lead wires (yellow, orange)
*one Lead wire (black) from Brush holder
Put Terminal block
in this portion.
Terminal block
Fix the following lead wires with Lead wire holder:
*two Field lead wires (black, white)
*two Lead wires (white) of Noise suppressor (if used)
Noise suppressor
(if used)
Put Noise suppressor
in this portion if used.
P 9 / 9
Lead wire holder
Lead wire holder