Operation; Working Notes; Working With The Thread Reel - Grizzly MTS 43 AC E2 Translation Of The Original Instructions For Use

GB
11. To switch off the engine, set the on/off
switch (40) in position "OFF" 0 .
If the engine fails to start after several
attempts, follow the instructions in the
chapter on "Troubleshooting".
pic. 10
41
40
Œ
42
Ž

10
3

Operation

Working Notes

• When cutting, observe the country-
specific / local regulations.
• Do not cut during commonly applica-
ble quiet periods.
• Solid objects such as stones, metal
pieces or similar must be removed.
These can be thrown out and there-
fore result in personal or property
damage.
• When cutting in high bushes or hedg-
es, the working height should be at
124
Work safely and considerately!
•
•
22
•
4
•
•
3
•
•
•
•
•
10

Working with the Thread Reel

•
•
•
•
least 15 cm. This prevents the risk to
animals, e.g. hedgehogs.
Always hold the equipment firmly and
securely with both hands
(see picture 8).
Cut only grass and weeds. Be aware
of roots or tree stumps – risk of trip-
ping.
Work considerately and endanger no-
body when cutting. Work quietly and
carefully.
Work only in adequate visibility and
lighting conditions.
Keep an eye on the cutting head.
Never cut above shoulder height.
Never replace the plastic cord with a
steel wire – risk of injury and damage.
Do not work on a ladder.
Work only on firm and stable bases.
Always carry the equipment suspend-
ed by the shoulder strap or on the
tube.
On small grass areas, hold the equip-
ment at an angle of approx. 30° and
turn evenly to the right and left with a
semi-circular movement.
The best results are obtained with
maximum grass length of 15 cm. If the
grass is longer, mowing several times
is recommended.
To cut around trees, fence posts or
other obstacles, go slowly around the
obstacle with the equipment and cut
with the thread tips.
Avoid contact with solid obstacles
(stones, walls, board fences etc) oth-
erwise the thread will quickly wear out.
Use the edge of the protective cover
to keep the equipment at the correct
distance