Exchanging The Cylinder; Storage; Disposal And Protection Of The Environment - Grizzly ERV 1801-37 ZV Translation Of The Original Instructions For Use

• When work has finished remove plant
residues adhering to the wheels, in-
side the ventilation opening, the grass
ejector opening and the cylinder. Do
not use hard or pointed objects for this
purpose as they could damage the im-
plement.
• Completely empty the collection bag.
• Always keep the implement clean. Do
not use cleaning agents or solvents.
We cannot be held liable for damage
caused by our implements if they were
improperly repaired, if non-original parts
have been used or if they were used not
in keeping with their intended purpose.
E

Exchanging the cylinder

Switch off the implement, discon-
nect the mains plug and wait until
the cylinder is standing still.
Wear gloves when handling the
cylinder.
1. Turn the implement over.
2. Loosen the wing screw (19) and pull
the bearing support upwards.
3. Tilt the cylinder (
and pull the shaft out of the square
receptacle (20).
4. Insert the new cylinder (
reversing the sequence.

Storage

• Store the implement in a dry place well
out of reach of children.
• Allow the motor to cool down before
placing the implement in a closed
room.
A 16/17) upwards
A 16/17) by
• Do not wrap nylon sacks around the
implement as this could result in the
formation of moisture.
To save space when stored, the
handlebar can be folded down af-
ter releasing the tightening levers.
Ensure that the cables are not
squeezed.
Disposal and protection
of the environment
Dispose of the implement, accessories
and packaging in an environment-friendly
manner.
Electrically-powered appliances
must not be disposed of with the
domestic waste.
Hand in the spent implement to a recy-
cling centre. The plastic and metal parts
can then be sorted out and graded for re-
cycling. Our Service Center will be happy
to answer any questions in this respect.
GB
31