Table of Contents
Advertisement
make the loading condition. Then turns power off.
2. Confirm that the clearance between T Guide and T1 Post is 0.2 mm
to 0.5 mm. (A little clearance is necessary.)
3. If it is not, loosen the 2 screws (A) and adjust the position of T1
guide by moving arrow direction (B)
5.7.4. Adjustments after Cylinder Unit Replacement
1. Adjust following items after cylinder unit replacement.
Note:
For the PG Shifter Adjustment, release hand from the search button after changing the PG
Shifter value at right of "PG SHIFT" on the monitor. If the value is not changed for a long time,
tape error or ITI envelope lack may be occurred.
5.7.5. A/C Head Replacement
Replacement Procedures
Tool
54
Advertisement
Chapters
Table of Contents
