Panasonic DVC PRO Studio AJ-D950P Service Manual page 26

down the post until envelope becomes flat.
4. Adjust T1 post and makes exit side of the envelope flat then adjust
S1 post.
5. After the adjustment, unload the tape then loading the tape.
Confirm the waveform style.
5.6.14. Post Limit Confirmation (Play)
Specification
Mode
Tape
Tool
1. Confirm the each Post Limit is as shown in figure, if it is not adjust
the post height.
2. Confirm that there is no tape problem as D,E,F in the figure.
Post Limit
S5 Free or Lower Limit
S4 Lower Limit
S1 Upper Limit
T1 Upper Limit
T3 Lower Limit
T4 Free or Lower Limit
No curl at the Tape edge
All Post Limit
PLAY
Work Tape
VFK1149(Post Driver)
VFK1151(Nut Driver)
Adjustment
S5 Post Height
S4 Post Height
Linearity Coarse
Linearity Coarse
T3 Post Height
T4 Post Height
26