Table of Contents
Advertisement
Appendix B — Default Settings
Default Configuration
If you restore the printer to factory default settings, the printer will use
these values. The order of the settings reflects the organization of the
printer Web page and Main Menu.
Serial Port Settings
Serial port settings are accessible when the printer is serially connected
to a PC.
Serial Port Settings
Setting
Description
Baud Rate
Transmission speed in bits per second (bps) for the serial
port.
Data Bits
Number of bits that define a character or byte.
Parity
Specifies how the printer checks the integrity of the
transmitted data.
Stop Bits
Number of bits sent at the end of every character to allow
the receiving signal hardware to detect the end of a
character and to resynchronize with the character stream.
Hardware
Specifies if hardware flow control (RTS/CTS) is used to
manage the rate of data transmission between the device
and the host.
ENQ/ACK
Specifies if software flow control (ENQ/ACK) is used to
manage the rate of data transmission between the device
and the host.
XON/XOFF To
Specifies if software flow control (XON/XOFF) is used to
manage the rate of data transmission to the host.
XON/XOFF From
Specifies if software flow control (XON/XOFF) is used to
manage the rate of data transmission from the host.
New Line
Defines the characters that the printer echoes to the host
Character
to indicate that it has moved to a new line.
84
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
PM42 Industrial Label Printer User Manual
V10 CONSUMIBLES S.L.
Default
115200
8
None
1
Disable
Disable
Disable
Disable
CR/LF
Advertisement
Table of Contents
