Table of Contents
Advertisement
Chapter 3 — Connect the Printer
Connect the Printer to an Ethernet Network
When the printer is connected to your network, you can send commands
directly to the printer through a terminal connection (Telnet) or send
instructions through FTP. When you turn on the printer, it automatically
retrieves an IP address from the network (DHCP).
•
About the USB Ports
The printer has a USB host port and a USB device port. You can connect
peripheral devices to either USB port.
USB Peripheral Devices
Device
Keyboard
Bar code
scanner
USB storage
device
26
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
Connect the Ethernet cable to the Ethernet port on the back of the
printer and connect the other end of the cable to your network:
•
If your network uses a DHCP server to assign IP addresses, the
IP address appears in the lower left corner of the screen.
•
If your network does not use a DHCP server to assign IP
addresses, you need to set a static IP address and other network
information manually. From the Main Menu, select Settings >
Communications > Ethernet > IPv4 or IPv6 and configure the
necessary settings.
Description
Use a standard USB keyboard to send Fingerprint
printer language commands directly to the printer or to
enter information if you are running a Smart Printing
application.
Use Honeywell USB bar code scanners for data input
with a Smart Printing application. The printer also
supports other USB scanners that use a generic
keyboard driver.
Use a USB storage device to load applications,
configuration files, fonts, and images to the printer
memory, or to perform firmware upgrades. You can also
save configuration files to a USB storage device to
upload to a printer. The USB storage device must have a
single partition and be formatted as FAT16 or FAT32.
V10 CONSUMIBLES S.L.
PM42 Industrial Label Printer User Manual
Advertisement
Table of Contents
