Load Media From An External Supply - Honeywell PM42 User Manual

Chapter 2 — Set Up the Printer

Load Media from an External Supply

You can place the media supply, such as fanfold tickets or tags, behind or
underneath the printer.
1 Open the media cover.
2 Turn the printhead lift lever counterclockwise to raise the printhead.
3 Feed media through the slot in the back of the printer (or from the slot
4 Turn the printhead lift lever clockwise to close the printhead.
5 Close the media cover.
6 Press the Print button to advance the media.
7 Configure the printer for the correct media type: media with gaps,
18
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
in the bottom of the printer) and route it through the print mechanism.
black mark, continuous fixed length, or continuous variable length.
V10 CONSUMIBLES S.L.
PM42 Industrial Label Printer User Manual