Set The Command Language From The Main Menu; Set The Command Language From The Printer Web Page - Honeywell PM42 User Manual

Chapter 1 — About the Printer

Set the Command Language from the Main Menu

You can use the Settings option from the Main Menu to change the
printer command language.
1 From the Main Menu, select Settings > System Settings > General.
2 Press
3 Press
4 Press
5 Turn the printer off and then on. The printer starts up in the command
Set the Command Language from the Printer Web
Page
To set the command language from the printer web page, you need to
turn on the printer and connect to your Ethernet network.
1 Make sure that the printer has media and ribbon (if necessary)
2 On your PC, open a Web browser.
3 In the Location or Address bar, type the printer IP address and
4 Click Login. The Login page appears.
5 Type your Username and Password and click Login. The default
12
Calle Llanos de Jerez 18 Nave 9 Coslada https://v10consumibles.com Tel: 910 269 309
to scroll down to Command Language.
or to select a different command language.
to save your changes.
If you are prompted to enter a password for DSim, the password is
1138. To return to the Fingerprint menu system from DSim, the
password is 8311.
language you selected.
installed.
press Enter. The printer web page appears.
username is itadmin
V10 CONSUMIBLES S.L.
and the default password is
PM42 Industrial Label Printer User Manual
pass .