Connecting The Printer To A Pc And Installing The Driver; Connecting The Printer To Your Network - Honeywell PC42t User Manual

HONEYWELL PC42t User Guide
2.3.4

Connecting the printer to a PC and installing the driver

The printer driver is included on the CD that you received with the printer.
If you do not have access to the CD, you can get the driver:
 on the manufacturer's webpage at:
GB/Pages/Product.aspx?category=printers&cat=HSM&pid=pc42
the InterDriver 7.4.3 M-3)
Connect the printer to a PC with either the USB cable or the serial cable. The USB cable is part
of the basic equipment, whereas the serial cable must be ordered separately.
2.3.5

Connecting the printer to your network

The printer also has an Ethernet port. Connect it to the local network using an appropriate cable
(Cat. 5e or newer, not included). To set up network printing, you must configure the printer's
network interface using one of the two methods:
1. Use the printer's built-in web interface.
2. Use the PrintSet software, which is included on the CD that you received with the
printer. Run the program and start the configuration process. For help, see the PrintSet
online help.
Printer's web interface (Figure 3)
Enter the printer's IP address into the browser's address bar and log in with the default username
itadmin and default password pass:
 The Configure tab displays all printer settings.
 The left-hand side of the window contains the following menus:
 Configuration Summary (current printer settings),
 Communications (serial port settings),
 Printing (media, print quality and other settings),
 System Settings (service, general settings, messages).
6/13
https://aidc.honeywell.com/en-
© IZUM, 6. 3. 2018, SPO-NA-EN-316, V1.0
(under Software, click
SPO