Set The Command Language With The Print Button; Set The Command Language From The Printer Web Page - Honeywell PC42T User Manual

Chapter 1 — About the Printer

Set the Command Language with the Print Button

Set the Command Language from the Printer Web
Page
18
1 Make sure the printer has media and ribbon (if necessary) installed.
2 Turn off the printer.
3 Press and hold the Print button.
4 Turn the printer on. The green LED turns on and blinks.
The printer calibrates the media, prints out a configuration label, and
then it prints labels with the different command languages one at a
time at two second intervals.
5 When the label prints out with the command language you want to
use, release the Print button.
To set the command language from the printer web page, you need to
turn on the printer and connect to your Ethernet network.
1 Make sure that the printer has media and ribbon (if necessary)
installed.
2 On your PC, open a browser.
3 In the Location or Address bar, type the printer IP address and
press Enter. The printer web page appears.
PC42t Desktop Printer User Guide