WIRE ROUTING DIAGRAM
CONTROL PANEL AND CONTROL BOX (EF7000/EF7200)
1 Oil warning light
2 Engine switch
3 Voltage/hour meter
4 AC receptacle
5 AC switch (N.F.B.)
6 Oil warning unit
7 Rectifier
8 AVR
9 Voltage adjuster
0 Condenser holder
q Condenser
w Wire harness
WIRE ROUTING DIAGRAM
e Ground (earth) terminal
r Panel cover
A Control box
B 32.6 mm (1.28 in)
C 16 mm (0.63 in)
D Behind the control box panel
E Connect the condenser lead
coupler as shown in the illus-
tration, paying attention to
polarity.
F Negative side mark
7-14
SPEC
G Pay attention to the polarity
when connecting the lead to
the condenser.
H Pawls on voltage/hour meter
properly engaged
I Pawls on voltage/hour meter
improperly engaged
J Make sure that the pawls are
properly engaged on both
sides of the panel cover.
K Behind the control box
L To engine