Yamaha EF7000 Service Manual page 102

FUSE (EF7000E/EF7200E/EF7200DE)
4. Replace:
9 Blown fuse
Replacing steps:
a. Set the engine switch to "STOP".
b. Install a new fuse of the correct amper-
age.
c. Set the engine switch to "ON" and veri-
fy if the electrical circuit is operational.
d. If the fuse immediately blows again,
check the electrical circuit.
Fuse amperage:
20 A
WARNING
Never use a fuse with an amperage other
than that specified. Improvising or using a
fuse with the wrong amperage rating may
cause extensive damage to the electrical
system and could possibly cause a fire.
5. Install:
9 Fuse
6. Install:
9 Panel cover
9 Panel cover screws
5-27
ELEC
1.3 Nm (0.13 m · kgf, 0.94 ft · lbf)