Chapter 8; Csa Hazardous Location Approval; Csa Certification - Honeywell EXPERION PKS Installation Manual

Controlnet

Hide thumbs Also See for EXPERION PKS:

Table of Contents

CHAPTER

8.1

CSA Hazardous Location Approval

CSA certifies products for general use as well as for use in hazardous locations. Actual CSA

certification is indicated by the product label as shown below, and not by statements in any user

documentation.

Example of the CSA certification product label:

CSA logo is a registered trademark of the Canadian Standards Association.

Temperature Ratings

Notices

8.1.1

CSA Certification

To comply with CSA certification for use in hazardous locations, the following information becomes a

part of the product literature for this CSA-certified industrial control product:

This equipment is suitable for use in Class I, Division 2, Groups A, B, C, D, or non-hazardous

locations only.

The products having the appropriate CSA markings (that is, Class I, Division 2, Groups A, B, C, D)

are certified for use in other equipment where the suitability of combination (that is, application or

use) is determined by the CSA or the local inspection office having jurisdiction.

PPENDIX

- 61 -

Table of Contents

Show Quick Links

Table of Contents