Chapter 7 - Controlnet Cable Installation; Preparing To Install Controlnet Cabling; Before You Begin; Pre-Built Cables - Honeywell EXPERION PKS Installation Manual

CHAPTER
7

Preparing to Install ControlNet Cabling

l
Installing Trunk Cable
l
Connecting and Terminating Cables
l
7.1 Preparing to Install ControlNet Cabling
7.1.1

Before you begin

ControlNet trunk cables may be purchased in pre-built (factory-assembled) lengths, or you may build
your own. The following installation procedures apply to both pre-built and custom built options.
ControlNet drop cables are supplied as part of taps in tap kits and are a fixed one-meter length that
can't be changed, so you can't build our own.
7.1.2

Pre-built cables

Table 2 lists the pre-built cables available from Honeywell.
Component
1 meter trunk cable, with connectors
3 meter trunk cable, with connectors
10 meter trunk cable, with connectors
30 meter trunk cable, with connectors
50 meter trunk cable, with connectors
100 meter trunk cable, with connectors
200 meter trunk cable, with connectors
500 meter trunk cable, with connectors
ControlNet Network Access Cable
ControlNet T-tap Drop Cable w/right angle connectors
ControlNet T-tap Drop Cable w/straight connectors
C N
ONTROL ET
Table 7.1 Pre-built ControlNet cables
C I
ABLE NSTALLATION
Type
PVC-CL2 TC-KCCX01
PVC-CL2 TC-KCCX03
PVC-CL2 TC-KCCX10
PVC-CL2 TC-KCCX30
PVC-CL2 TC-KCCX50
PVC-CL2 TC-KCC100
PVC-CL2 TC-KCC200
PVC-CL2 TC-KCC500
PVC-CL2 9904-CP
PVC-CL2 9904-TPR
PVC-CL2 9904-TPS
- 50 -
Model Number