Component Handling Guidelines; About Pcic Card Drivers; Installing The Pcic Card; Prerequisites - Honeywell EXPERION PKS Installation Manual

3.1.2

Component handling guidelines

ATTENTION
Remember, a computer with ac power disconnected is not a grounded object.
3.1.3

About PCIC card drivers

The following releases of Rockwell Software's RSLinx include the device drivers for the PCIC card:
RSLinx 2. 1 Service Pack 2 and later
l
RSLinx 2. 2 and later
l
Refer to online Help in RSLinx for information on configuring the driver for the PCIC card. For more
information about RSLinx, visit,
3.2

Installing the PCIC Card

3.2.1

Prerequisites

NOTE
Electrostatic discharge
ESD
http://www.software.rockwell.com.
Chapter 3 - ControlNet PCIC Card Installation
The PCIC card uses CMOS technology,
which is highly sensitive to electrostatic
discharge (ESD). ESD may be present
whenever you are handling the card. Handling
a card without any ESD protection can cause
internal circuit damage that may not be
apparent during installation or initial use.
Follow these guidelines when you handle a
card:
Touch a grounded object to discharge
l
static potential,
Wear an approved wrist-strap grounding
l
device,
Do not touch the connector pins,
l
Do not touch circuit components on the
l
card,
If available, use a static safe workstation,
l
When not in use, keep the card in its static
l
shield box or bag.
- 12 -