Installing Or Replacing A Full-Height Node Line Card - Cisco 6400 Maintaining

Installing or Replacing a Full-Height Node Line Card

Installing or Replacing a Full-Height Node Line Card
The Cisco 6400 supports one full-height NLC module: OC-12/STM-4 NLC
full-height NLC is premounted on its carrier.
Figure 5-29 OC-12 NLC Faceplate
Class 1 laser product. Translations of this warning can be found in the Regulatory Compliance and
Warning
Safety Information document that accompanied this device.
Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
Warning
connected, avoid exposure to radiation and do not stare into open apertures. Translations of this
warning can be found in the Regulatory Compliance and Safety Information document that
accompanied this device.
Invisible laser radiation present. Translations of this warning can be found in the Regulatory
Warning
Compliance and Safety Information document that accompanied this device.Class 1 laser product.
Translations of this warning can be found in the Regulatory Compliance and Safety Information
document that accompanied this device.
Warning Because invisible radiation may be emitted from the aperture of the port when no fiber cable is
connected, avoid exposure to radiation and do not stare into open apertures. Translations of this
warning can be found in the Regulatory Compliance and Safety Information document that
accompanied this device.
Invisible laser radiation present. Translations of this warning can be found in the Regulatory
Warning
Compliance and Safety Information document that accompanied this device.
Cisco 6400 Hardware Installation and Maintenance Guide
5-36
Tx Rx
Chapter 5 Maintaining the Cisco 6400
(Figure 5-29). The
OL-2133-02