Makita DUR361U Technical Information page 8

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -2. Gear case assembly (cont.)
ASSEMBLING
(1) Assemble Ball bearing 6000DDU to Cutter shaft complete. (Refer to the bottom right drawing in Fig. 8.)
(2) Assemble Cutter shaft complete to Gear case. (Fig. 9)
Fig. 9
1. Receive Gear case assembly with the U-shape table of Arbor press,
then press down Ball bearing 6201DDU with 1R027 to set Cutter
shaft complete in place.
Gear case
assembly
U-shape table of
Arbor press
(3) Assemble further step by reversing the disassembly procedure. (Refer to Fig. 8)
Ball bearing
6201DDU
Cutters shaft
complete
2. Secure Cutter shaft complete
with Retaining ring R-26.
Retaining ring R-26
1R027
P 8/ 16