Makita DUR361U Technical Information page 15

W
iring diagram
Fig. D-3
Set Flag connectors to Terminals A and B as shown below.
Flag connector
Fig. D-4
Wiring in Housing (L) with Terminals and Adapter circuit complete
Put Adapter circuit complete's
lead wires connected to Terminal A
between Ribs E and F.
Adapter circuit complete
Pass Adapter circuit complete's
lead wires between Housing (L)
and Adapter circuit complete.
Put Adapter circuit complete's
lead wires connected to Terminal B
between Ribs G and H.
3-Pin connector of
Adapter circuit complete
Wiring to Terminals
Flag connector
Terminal A
Rib A
Rib E
Terminal A
Rib F
Rib G
Terminal B
Rib H
Put Adapter circuit complete's lead wires connected
to 3-Pin connector between Ribs I and J.
Terminal B
Lead wires of Adapter circuit complete have to be
put between Rib A and Adapter circuit complete.
Note: Be careful not to put them onto Rib A.
Controller
Rib J Rib I
P 15/ 16
Power supply cord unit