Makita DUR361U Technical Information page 16

W
iring diagram
Fig. D-5
Wiring to reverse switch
Connect Receptacles to Reverse switch
as shown below.
Lead wires of Power supply cord unit
with Closed end splices have to be put
between Pin and Rib.
Note: The other wires can also be put
between Pin and Rib.
Wiring of Power supply cord unit in Main grip set
Reverse switch
Receptacle
Receptacle
(with Receptacle sleeve)
Power supply cord unit
Reverse switch
Pin
P 16/ 16
Lead wires of Reverse
switch have to be put
under Trigger switch.
Trigger switch
Rib
Cord clamp
Be careful not to clamp
Tube with Cord clamp.
Tube