Symbology Settings; Decode Settings - Honeywell ScanPal EDA71 User Manual

Symbology Settings

Use the Symbology Settings to enable or disable bar code symbologies for the
selected scan setting profile.
•
Tap the symbology name to view and modify additional configuration parameters
for the symbology selected.
To view a list of default settings for supported symbologies, see

Decode Settings

Adjust the Decode Settings when scanning bar codes that are densely packed or
poor quality.
Decode Settings
Setting
Center Decode
Decode Security
Poor Quality 1D
Reading
Video Mode
EDA71 User Guide
Tap the check box next to a symbology name to enable (check mark) or disable
(no check mark) decoding for that symbology.
Description
When enabled, the imager scans and decodes a bar code only if
part of the bar code is at the center of the aimer window. This is
useful in situations where several bar codes may be very close
together in the imager field-of-view.
•
•
Honeywell recommends leaving the settings at 50 (default) to
define the "center" area for the bar code.
Configurable parameters:
•
•
•
•
Enable this setting when scanning damaged or badly printed 1-
D bar codes to improve bar code read success.
Use this setting to specify whether normal or inverse decoding
for linear symbologies is enabled during the execution of
Decode. By default normal video is enabled. Options include:
•
•
•
Tap the check box to toggle the feature On or Off.
Select Center Decode to adjust the Window dimensions.
Window top
Window bottom
Window left
Window Right
Normal
Inverse
Normal and Inverse
page 96.
Default
Disabled
Disabled
Normal
31