Full Factory Reset The Computer; Clean The Tablet - Honeywell ScanPal EDA71 User Manual

Full Factory Reset the Computer

1. Swipe up from the bottom of the Home screen to access all apps.
2. Select Settings
3. Tap Full factory reset.
4. Tap Reset Phone.
5. If prompted, type your screen lock security pattern, PIN, or password and tap
6. Tap Erase Everything. A message appears informing you an Full factory reset

Clean the Tablet

To keep the tablet in good working order, you may need to clean the scanner
window, color camera window, and the touch screen. Clean the windows and the
touch screen as often as needed for the environment in which you are using the
tablet. The tablet withstands application of the following cleaning agents when
applied to a clean soft cloth and removed immediately with a dry soft cloth:
•
•
•
Note: Always leave the battery installed when you clean the computer.
1. Press the Power button to suspend the computer.
2. Dip a clean cloth towel in the cleaning agent and wring out the excess.
3. Wipe off the scanner window, camera lens, and flash area. Do not allow any
4. Wipe dry.
5. Let the computer completely air dry before using again.
EDA71 User Guide
next ( ).
is being performed.
Acetic acid, 10% in water
Ethyl alcohol, 10% in water
Mild soap solutions
abrasive material to touch these surfaces.
> Backup & reset.
73