Connect A Bluetooth Device; Disconnect A Paired Device - Honeywell RT10W User Manual

The Bluetooth radio maintains its current state through a system reset. If you
perform a factory data reset, you must recreate pairings to devices.

Connect a Bluetooth Device

To connect to a Bluetooth device, you must enable Bluetooth and then select the
device from a list of discovered devices.
Note: If you are attempting to connect to a printer or a headset, the default PIN may be
1234 or 0000. If neither of these PIN numbers work, consult the device
documentation for the PIN number.
1. Tap
2. Tap
3. Tap Devices > Bluetooth & other devices.
4. Tap the toggle to turn on Bluetooth.
5. Tap Add Bluetooth or other device.
6. Tap Bluetooth. A list of discoverable Bluetooth devices displays.
7. Tap the name of the device you want to pair with the RT10.
8. If the device requires a pin, do one of the following:
9. When the devices are paired successfully, "paired" displays under the device

Disconnect a Paired Device

You can disconnect a paired Bluetooth device from the Settings App.
1. Tap
2. Tap
3. Tap Devices > Bluetooth & other devices.
4. Scroll down to Other devices.
5. Tap and the name of the paired device to select it.
6. Tap Remove Device.
7. Tap Yes to confirm.
RT10W Rugged Tablet
.
.
• Compare the pin displayed on both the computer and other device. If they
match, select Connect.
• Enter the pin for the device and then select Done.
name.
.
.
51