Insert A Microsim Or A Microsd Card - Honeywell ScanPal EDA71 User Manual

Sound Settings
Setting
Media Volume
Alarm Volume
Ring Volume
Also Vibrate for calls
Do not disturb
Phone ringtone
Default notification
ringtone
Default alarm ringtone
Emergency
broadcasts
Other sounds
Dial pad tones
Screen locking sounds
Charging sounds
Touch sounds
Vibrate on tap

Insert a microSIM or a microSD Card

Only EDA71-1 (WWAN) models support SIM card use for cellular phone features.
SIM slot feature on EDA71-0 (WLAN) models is limited to UICC card use for NFC
Secure Element NFC link encryption only.
Note: Format the memory card before initial use.
Caution: Always power off the computer before attempting to install or
1. Save your files and close any open applications.
2. Press and hold the Power button until the options menu appears.
3. Tap Power Off.
4. Press down the battery cover safety button to move the lock to the unlock
5. Open the battery cover with the battery cover buckle handle.
6. Open the battery connector side, then pull out the battery.
7. Open the micro card's silicone cover
8. Open the card cover and insert the card.
EDA71 User Guide
Description
Use the sliders to set the volume for media (e.g., music, videos, and
games), alarms, and rings (notifications and ringtones).
Select to enable vibrate mode when the phone is ringing.
Select to set which notifications to let through when you have Do
Not Disturb turned On and when you want to be left alone.
Select a default ringtone.
Select a notification sound.
Select a alarm sound.
Select to configure Emergency alert settings.
Turn alerts On or Off, specify tone, vibrate or text-to-speech.
Enable or disable an audio sounds when you use the phone dial pad.
Enable or disable an audio tone when the screen is locked.
Enable or disable an audio tone when the computer is charging.
Enable or disable audio sounds when you use the touch screen.
Enable or disable vibrate mode when you touch the screen.
remove a card.
position at right.
13