About The Battery - Honeywell ScanPal EDA71 User Manual

Back View
NFC
Antenna
Location
SIM Card
Cover/Slot
microSD
Card Slot

About the Battery

EDA71 uses 3.8V rechargeable lithium ion battery as its main power supply. The
battery capacity is 15.2 watt/hour. Battery life is influenced by many factors, such
as: screen brightness, the length of time before the screen automatically go to
sleep, input configurations, extreme temperature and using behaviors, etc.
Note: Honeywell suggests you to keep the battery charged to avoid data loss. Change
battery only after switching off the device as per normal. Switch on the device after
completing change of battery.
If you need to buy a replaceable battery, please contact regional resellers.
Honeywell recommends using only a Honeywell lithium battery; any damage
caused by use of non-Honeywell battery is not covered by warranty.
EDA71 User Guide
Camera
Lens
I/O Connector
Camera Flash/Flashlight
Power Button
Scan Button
Battery Door Latch
Battery Door
Speaker
3