Honeywell ScanPal EDA71 User Manual page 40

Setting
Suffix
Wedge as Keys
Data Editing Plugin
Symbology Prefix
Launch Browser
Scan to Intent
Launch EZ Config
30
Description
Defines the string added after the decoded bar code data.
Substitutions occur within the Suffix string values.
Substring Replacement Character Code
\r 13
\n 10
\t 9
\\ '\'
List of character values to wedge as keys, represented as a
comma-separated list of decimal values.
Specify a Total Freedom data editing plug-in and edit
plug-in settings.
Specify a symbology identifier prefix to the bar code data.
Options include:
• None
• Honeywell
• AIM
Enable or disable URL bar code handling.
If a bar code starts with http:// or https://, the browser
opens using the bar code data as a URL.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH-BROWSER
Enable or disable special handling of scan-to-intent bar
codes.
Applies to bar codes in one of the following formats:
'//' ACTION
'//' ACTION '$' extra-data
Where: ACTION and extra-data are any string of
characters.
Launches an application listening for the intent.
Intent action:
"com.honeywell.scantointent.intent.action." + ACTION
Intent extra:
"com.honeywell.scantointent.intent.extra.DATA" contains
the remainder of the bar code data after the first '$'
character.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_SCAN_TO_INTENT
Enable or disable special handling of EZConfig bar codes.
Applies to EZConfig bar codes that are encoded with the
Aztec symbology and contain specific header data.
Corresponds to BarcodeReader property:
PROPERTY_DATA_PROCESSOR_LAUNCH_EZ_CONFIG
Default
None
9,10
None
None
Enable
Enabled
Enabled
EDA71 User Guide