Connect To Monitor; Connect To An Ethernet Network; Connect To An Usb Device - Honeywell ScanPal EDA71 User Manual

Connect to Monitor

Note: See
1. Plug the HDMI cable into the dock.
2. Plug the other end of the HDMI cable into the monitor.

Connect to an Ethernet Network

1. Plug the Ethernet cable into the dock.
2. Place the EDA71 tablet in the dock.
Note: For advanced Ethernet settings, go to
EDA71 Enterprise Tablet User Guide.

Connect to an USB Device

Note: See
Note: The dock supports USB direct connections only. The dock does not support USB hub
connections, including keyboards with USB port(s).
Plug the USB type A cable into a USB port on the dock.
ScanPal EDA71 Display Dock
Monitor Connections
USB Devices for a list of approved USB devices.
for a list of approved connections.
www.honeywellaidc.com for the ScanPal
3