Camera Controls - Cisco SX80 User Manual

Tap and hold the Selfview image .
Drag the image to a new position, shown
here is the upper left corner .

Camera Controls

The camera controls allow you to manually control the zoom, pan and tilt of the camera as well as define
Camera Presets .
Tap Camera to invoke the
camera adjustment menu .
MBTelehealth - SX80 with Touchpad10 User Guide
Move the Selfview PiP Box
Adjust Camera Manually
Tap the desired
Camera Preset .
The selfview image will now turn blue . You will
also see the alternate positions available for the
selfview image . Keep holding the image .
Release the image by lifting your finger
from the screen . The selfview image has
now assumed its new position .
Turn Selfview
Pan/tilt controls .
On and Off. (arrows)
Maximize/minimize
Selfview .
Zoom in and out
(+/-) .
Page 6 of 19