Overview - Cisco SX80 User Manual

OVERVIEW

This user guide will provide you with an overview and the knowledge to setup and use the SX80
videoconference solution and the Touchpad 10
The main components included with the SX80 and Touchpad 10 are the Camera, Codec, Ethernet Cable,
Microphone, Screen/Monitor and Touchpad . In some instances there may also be a router .
Camera:
high quality imaging device which
transmits images to the screen/monitor . The
camera movements are controlled by a wireless
infra-red (IR) remote control that controls a
variety of functions, both on the near and far
end .
Codec: central part of the videoconferencing
equipment . The main task of the codec is the
compression of outgoing video, audio and data, the
decompression of the incoming information and the
transmission of this information between endpoints .
The name codec comes from a combination of the
two words compression and decompression .
Touchpad 10: used to place calls, adjust the volume,
navigate screens and select options . It controls
all functions of the videoconferencing equipment,
including moving the camera .
Screen/Monitor:
the far end or the near end image and content as
selected by the user .
MBTelehealth
Main Components
built-in screen/monitor displays
- SX80 with Touchpad10 User Guide
Page 3 of 19