General Use; Setup - Cisco SX80 User Manual

GENERAL USE

The following sections will provide instructions for using your SX80 and Touchpad 10 solution to place
and receive videoconference calls .

Setup

Wake the codec by tapping the touchpad and turn on the video screen/monitor if required . In a few seconds
you will see the home screen .
Before the meeting starts we recommend that you check the selfview . The selfview displays an image of
your camera view on screen and shows you what you will be sending to the other site . The selfview appears
as a PIP (Picture-in-Picture) .
Outside a call:
Tap Camera
During a call:
MBTelehealth - SX80 with Touchpad10 User Guide
Setup and Use the Equipment
Tap Selfview to turn it on .
.
You may now maximize/
minimize, turn selfview
off, or tap Camera to
control your own camera .
a
b
Tap Camera (a) and then tap
Selfview (b) to turn it on (you
may now resize the selfview
image or control the camera) .
Selfview
Selfview
Tap anywhere outside the
menu to exit .
Tap anywhere outside the
menu to exit .
Page 5 of 19