Refitting The Cable Harness - ABB IRB 8700 Series Product Manual

4.4.2 Refitting the cable harness

Location of the cable harness
The cable harness is located as shown in the figure.
xx1500001878
Required spare parts
Spare part
Cable harness
Required tools and equipment
Equipment, etc.
Standard toolkit
Sparkplug wrench
Product manual - IRB 8700
3HAC052853-001 Revision: F
Note
The spare part numbers that are listed in the table can be out of date. See the
latest revision of Product manual, spare parts - IRB 8700 on ABB Library.
© Copyright 2015-2018 ABB. All rights reserved.
4.4.2 Refitting the cable harness
Article number
3HAC050792-001
Article number Note
- Content is defined in section
toolkit on page
- Used to remove and refit the R1.SMB
in the base.
4 Repair
Note
Standard
833.
Continues on next page
215