Install The Battery In The Handset - Cisco IP DECT 6800 Series User Manual

Install the Battery in the Handset

Install the Battery in the Handset

The handset battery is shipped inside the handset, but there is a plastic tab over the battery contacts. You need
to remove the plastic tab.
Procedure
Step 1 On the back of the handset, turn the latch counterclockwise to unlock the back, lift the clip, and lift the cover
to remove the battery cover.
Step 2 Remove the battery from the handset.
Cisco IP DECT 6800 Series User Guide
16
Remove the Handset Clip, on page 19
Handset Setup