Set The Timer To Automatically Lock The Handset - Cisco IP DECT 6800 Series User Manual

Set the Timer to Automatically Lock the Handset

Step 2
Select Settings
Step 3 Enter the PIN and press OK.
Step 4
Highlight Phone lock.
Step 5 Press Off to turn off the need for a PIN or On to require a PIN.
Step 6
Select Change PIN.
Step 7 Enter a new PIN and press OK.
You must use four digits for the PIN.
Step 8 Press Select to save the setting.
Related Topics
Set the Timer to Automatically Lock the Handset
You can set the handset to lock the keypad after a specific length of inactivity. When the keypad locks, you
need to unlock it before you can use it.
Note When the keypad is locked, you can only dial emergency numbers.
Procedure
Step 1
Press Menu
Step 2 Select Settings
Step 3
Highlight your choice.
• Off (default): The keypad never locks.
• 15 seconds: The keypad locks in 15 seconds.
• 30 seconds: The keypad locks in 30 seconds.
• 45 seconds: The keypad locks in 45 seconds.
• 1 minute: The keypad locks in 1 minute.
• 2 minutes: The keypad locks in 2 minutes.
• 3 minutes: The keypad locks in 3 minutes.
• 4 minutes: The keypad locks in 4 minutes.
• 5 minutes: The keypad locks in 5 minutes.
Step 4
Press Select to save the setting.
Related Topics
Cisco IP DECT 6800 Series User Guide
62
> Security > Phone lock.
Lock the Handset Keypad, on page 2
Unlock the Handset Keypad, on page 3
.
> Security > Automatic keylock.
Lock the Handset Keypad, on page 2
Settings