Related Topics - Cisco IP DECT 6800 Series User Manual

Calls
Before you begin
You need at least one contact in your Contacts list.
Procedure
Step 1
Press Contacts.
Step 2 Highlight the contact.
Step 3
Press More.
Step 4 Select Speed Dial.
Step 5 If you don't have an empty speed dial index entries, highlight a number you don't need, and press Delete.
Step 6
Highlight an empty speed dial index and press Add.
Step 7
Press Power/End

Related Topics

Speed-Dial Numbers
When you dial a number on your handset, you enter a series of digits. When you set up a speed-dial number,
the speed-dial number must contain all the digits you need to make the call. For example, if you need to dial
9 to get an outside line, you enter the number 9 and then the number you want to dial.
You can also add other dialed digits to the number. Examples of additional digits include a meeting access
code, an extension, a voicemail password, an authorization code, and a billing code.
The dial string can contain the following characters:
• 0 to 9
• Pound (#)
• Asterisk (*)
• Comma (,)—This is the pause character, and gives a 2- second delay in the dialing. You can have several
The rules for dial strings are:
• Use the comma to separate the parts of the dial string.
• An authorization code must always precede a billing code in the speed-dial string.
• A single comma is required between the authorization code and the billing code in the string.
• A speed-dial label is required for speed dials with authorization codes and additional digits.
Before you configure the speed dial, try to dial the digits manually at least once to ensure that the digit sequence
is correct.
Your handset does not save the authorization code, billing code, or extra digits from the speed dial in the call
history. If you press Redial after you connect to a speed-dial destination, the handset prompts you to enter
any required authorization code, billing code, or additional digits manually.
.
Add a Local Contact, on page 43
commas in a row. For example, two commas (,,) represent a pause of 4 seconds.
Speed-Dial Numbers
Cisco IP DECT 6800 Series User Guide
27