Set The Alert Volume; Set The Handset Vibration Mode; Set The Tone When A Key Is Pressed - Cisco IP DECT 6800 Series User Manual

Settings

Set the Alert Volume

You can change the volume of the tone that you hear when you press Emergency
Procedure
Step 1 Press Menu
Step 2
Select Settings
Step 3
Press right or left on the ring of the navigation cluster
Step 4 Press Ok to save the level.

Set the Handset Vibration Mode

You can set the handset to vibrate when you have an incoming call.
Procedure
Step 1 Press Menu
Step 2
Select Settings
Step 3 Highlight your choice.
• Off (default): When an incoming call rings on the handset, the handset doesn't vibrate.
• Vibrate then ring: When an incoming call rings on the handset, the handset vibrates and then rings.
• Vibrate only: When an incoming call rings on the handset, the handset vibrates. You do not hear the
• Vibrate and ring: When an incoming call rings on the handset, the handset vibrates and rings at the
Step 4
Press Select to save the setting.

Set the Tone When a Key is Pressed

You can set the sound you hear when you press a key.
Procedure
Step 1
Press Menu
.
> Alert volume.
.
> Vibrator.
ringtone.
same time.
.
Set the Alert Volume
.
Cisco IP DECT 6800 Series User Guide
.
57